Natural Materials Research Articles

Localized Ionic Reinforcement of Double Network Granular Hydrogels.

Nature produces soft materials with fascinating combinations of mechanical properties. For example, the mussel byssus embodies a combination of stiffness and toughness, a feature that is unmatched by synthetic hydrogels. Key to enabling these excellent mechanical properties are the well-defined structures of natural materials and their compositions controlled on lengths scales down to tens of nanometers. The composition of synthetic materials can be controlled on a micrometer length scale if processed into densely packed microgels. However, these microgels are typically soft. Microgels can be stiffened by enhancing interactions between particles, for example through the formation of covalent bonds between their surfaces or a second interpenetrating hydrogel network. Nonetheless, changes in the composition of these synthetic materials occur on a micrometer length scale. Here, 3D printable load-bearing granular hydrogels are introduced whose composition changes on the tens of nanometer length scale. The hydrogels are composed of jammed microgels encompassing tens of nm-sized ionically reinforced domains that increase the stiffness of double network granular hydrogels up to 18-fold. The printability of the ink and the local reinforcement of the resulting granular hydrogels are leveraged to 3D print a butterfly with composition and structural changes on a tens of nanometer length scale.

Health Technology Access and Peer Support Among Digitally Engaged People Experiencing Homelessness: Qualitative Study.

Although the effects of digital health are receiving wide scientific attention, very little is known about the characteristics of digitally engaged people experiencing homelessness, especially in Central and Eastern Europe. Our previous research revealed a considerable level of internet use in the homeless population of Budapest, Hungary, for general purposes (350/662, 52.9%) and medical purposes (229/664, 34.6%). Moreover, a digitally engaged subgroup was identified (129/662, 19.5%). The aim of this exploratory study was to map out the resources, attitudes, and behaviors of digitally engaged homeless individuals in relation to digital technology to set the basis for potential health policy interventions, which will enable better access to health services through strengthening of the digital components of the existing health care system. Between August 18, 2022, and October 27, 2022, a total of 12 in-depth semistructured interviews were conducted in 4 homeless shelters in Budapest, Hungary. Upon analysis by 3 independent evaluators, 2 interviews were excluded. The interviewees were chosen based on purposive sampling with predefined inclusion criteria. Thematic analysis of the transcripts was conducted. In the thematic analysis, 4 main themes (attitude, access, usage patterns, and solutions for usage problems) emerged. Health-related technology use mostly appeared in health information-seeking behavior. Online search for prescribed medications (5 interviews), active ingredients of medications (4 interviews), medicinal herbs believed to replace certain pills (2 interviews) or foods, and natural materials (1 interview) were mentioned. Moreover, mobile health app use (3 interviews) was reported. The intention to circumvent or check on mainstream health care solutions was mainly associated with previous negative experiences in the health care system. Several gaps in the daily use of technology were identified by the interviewees; however, more than half of the interviewees (6/10) turned out to be contact points for their peers for digital problem-solving or basic digital literacy skill enhancement in the homeless shelters. Furthermore, a lack of institutional support or special programs targeting senior clients was noted. Digitally engaged homeless individuals might become mediators between their peers and comprehensive digital health programs. They have the trust of their peers, can recognize and harness the benefits of digital technology, and are able to provide meaningful help in technology- and usage-related issues through experience. Digital health services have great promise in community shelters for managing and preventing health issues, and digitally engaged individuals might be important for the success of such services.

Decennary Update on Oxidative-Rearrangement Involving 1,2-Aryl C-C Migration Around Alkenes: Synthetic and Mechanistic Insights.

In recent years, numerous methodologies on oxidative rearrangements of alkenes have been investigated, that produce multipurpose synthons and heterocyclic scaffolds of potential applications. The present review focused on recently established methodologies for oxidative transformation via 1,2-aryl migration in alkenes (2013-2023). Special emphasis has been placed on mechanistic pathways to understand the reactivity pattern of different substrates, challenges to enhance selectivity, the key role of different reagents, and effect of different substituents, and how they affect the rearrangement process. Moreover, synthetic limitations and future direction also have been discussed. We believe, this review offers new synthetic and mechanistic insight to develop elegant precursors and approaches to explore the utilization of alkene-based compounds for natural product synthesis and functional materials.

Mechanical and Environmental Analysis of Granular Subbase with Fine Crumb Rubber

AbstractThe increasing manufacturing of tires, driven by the automotive sector, has led to various sustainability and waste management issues. Consequently, it is necessary to explore alternatives for the reuse of these wastes. Rubber has demonstrated properties that could make it an attractive material for use as a granular aggregate. The aim of this study is to evaluate the influence of crumb rubber (CR) on the mechanical behavior of a granular subbase (GSB) by replacing fine CR at 10% and 15%. An environmental analysis of the proposal was conducted using the SimaPro tool, and a series of laboratory tests were performed to assess physical and mechanical characteristics. The strength results indicate a decreasing trend as the CR content in the GSB increases. Specifically, in abrasion tests, the natural material showed an average result of 30.86%, while the mixes with 10% and 15% CR exceeded the maximum limit (50%), achieving results of 59.24% and 53.98%, respectively. In terms of the California Bearing Ratio (CBR), only the natural samples compacted at maximum energy exceeded the minimum requirements for low and medium traffic levels (30%). The highest CBR value for samples containing CR was 5%, whereas the natural GSB reached a maximum CBR of 33%. A similar trend is observed in environmental outcomes, with increases of up to 17% in abiotic depletion for the sample with 15% CR. Overall, the environmental analysis suggests that incorporating CR into the GSB could lead to an increase in various environmental impacts.

Greatly Enhanced Radiative Transfer Enabled by Hyperbolic Phonon Polaritons in α‐MoO3

AbstractOrthorhombic molybdenum trioxide (α‐MoO3) is a highly anisotropic hyperbolic material in nature. Within its wide Reststrahlen bands, α‐MoO3 has hyperboloidal dispersion that supports bulk propagation of high‐k phonon polariton modes. These modes can serve as energy transport channels to greatly enhance radiative heat transfer inside the material. In this work, large radiative transfer enabled by phonon polaritons in α‐MoO3 is demonstrated. The study first determines the temperature‐dependent permittivity of α‐MoO3 from polarized Fourier‐Transform Infrared (FTIR) spectroscopy measurements and then uses a many‐body radiative heat transfer model to predict the equivalent radiative thermal conductivity of hyperbolic phonon polariton. Contribution of radiative transfer to the total thermal transport is experimentally determined from the Time‐Domain Thermoreflectance (TDTR) measurements in a temperature range from −100 to 300 °C. It is found that radiative transfer can account for ≈60% of the total thermal transport at a temperature of 300 °C. That is, conductive thermal transport is enhanced by >100% by radiative transfer, or radiation inside α‐MoO3 is greater than that of conduction. These additional energy pathways will have important implications in thermal management in new materials and devices.

Coupled Electronic and Magnonic Topological States in Two-Dimensional Ferromagnets.

Magnetic materials offer a fertile playground for fundamental physics discovery, with not only electronic but also magnonic topological states intensively explored. However, one natural material with both electronic and magnonic nontrivial topologies is still unknown. Here, we demonstrate the coexistence of first-order topological magnon insulators (TMIs) and electronic second-order topological insulators (SOTIs) in 2D honeycomb ferromagnets, giving rise to the nontrivial corner states being connected by the charge-free magnonic edge states. We show that, with symmetry, the phase factor ± ϕ caused by the next nearest-neighbor Dzyaloshinskii-Moriya interaction breaks the pseudo-spin time-reversal symmetry , which leads to the split of magnon bands, i.e., the emergence of TMIs with a nonzero Chern number of , in experimentally feasible candidates of MoI3, CrSiTe3, and CrGeTe3 monolayers. Moreover, protected by the symmetry, the electronic SOTIs characterized by nontrivial corner states are obtained, bridging the topological aspect of fermions and bosons with a high possibility of innovative applications in spintronics devices.

Unraveling the genetic basis of superior traits in Gossypium barbadense: From phenotype to genotype

G. barbadense is renowned for its high-quality fiber and is highly regarded as a natural material in the textile industry. However, research on cotton has mainly focused on G. hirsutum, and progress in sea island cotton has been relatively slow. There was limited understanding of the genetic loci and transcriptional regulatory mechanisms of important traits, and the genetic basis for the development of superior traits remains unclear. In this study, a recombinant inbred line (RIL) population was constructed using two sea island cotton parents from different cotton regions. The phenotypic characteristics of the two parents and the RIL population, as well as the phenotypic correlations, heritability, and genetic models of the RIL population, were comprehensively analyzed. The RIL population was genotyped using whole-genome resequencing technology, and a high-density intraspecific linkage map was constructed, consisting of 5295 bin markers and a total genetic map distance of 2721.79 centimorgans (cM). Phenotypic data collected from five different environments were used to detect 169 quantitative trait loci (QTLs) using the composite interval mapping method. Among these QTLs, 30 were related to agronomic traits, 61 were related to yield traits, and 78 were related to fiber quality traits. Additionally, 17 QTL clusters were detected, and the additive effects of these clusters explained the correlation between different phenotypic traits. Candidate genes for stable QTLs related to agronomic and yield traits were identified through variant annotation and functional prediction. Two bin markers associated with lint percentage (LP) were validated as potential breeding markers. Furthermore, using RNA-seq data of cotton fiber from the RIL population parents, the dynamic changes in gene expression during different developmental stages of cotton fiber were revealed, and important differentially expressed genes in the secondary cell wall development and metabolism network of fibers were identified. Importantly, through the combined analysis of fiber trait QTLs and transcriptomes, eight candidate genes involved in regulating fiber quality traits were predicted, and the genetic basis of the excellent allele site qFL_D04_1 in the breeding history of Chinese sea island cotton was elucidated. In summary, this study provides new genetic resources and potential breeding markers for cotton variety improvement, valuable theoretical information for understanding the genetic basis of important traits in sea island cotton, and effectively promotes the development of cotton biotechnology breeding.

Casimir interaction driven by hyperbolic polaritons

Abstract Casimir interaction is an intriguing phenomenon that is induced by electromagnetic quantum fluctuations, which dominates the interaction between microstructures at small separations and is essential for micro- and nano-electromechanical systems (MEMS and NEMS). However, Casimir interaction driven by hyperbolic polaritons remains an unexplored frontier. In this work, we investigate the Casimir interaction between natural hyperbolic material hexagonal boron nitride from the perspective of force distribution with different optical axis orientations for the first time. The attractive Casimir force is remarkably enhanced due to the excitation of volume-confined hyperbolic polaritons (HPs). Furthermore, distinct repulsive contributions to the force are observed due to surface-confined HPs that only exist when the optical axis is in-plane. The HPs are associated with a striking thickness dependence of spectral force properties, suggesting that the discrete volume-confined HPs lead to the attractive-repulsive transition of Casimir force. This work sheds light on the relation between HPs and the vacuum fluctuation-induced force, which could offer new opportunities for the development of the MEMS and NEMS.

Recycled Eco-Concretes Containing Fine and/or Coarse Concrete Aggregates. Mechanical Performance

This study analysed the effect of substituting different percentages of natural aggregate with recycled aggregate from concrete crushing, using a coarse fraction as well as a fine fraction. Natural and recycled materials were classified in order to analyse the mechanical performance and impermeability of these eco-concretes in the fresh state as well as in the hardened state. A statistical analysis also determined whether the performance loss was significant from a statistical point of view, finding strength decreases of less than 13% in compressive strength and losses of less than 20% in flexural strength. An increasing trend was found in permeability as the percentage of recycled aggregate in the mix increased.

Evaluating the Effectiveness of Phellodendron Amurense Ruprecht Extract as a Natural Anti-Caries Material

Background: This study aimed to investigate the antibacterial and cytotoxic potential of Phellodendron amurense Ruprecht (PAR) extract against Streptococcus mutans (S. mutans) and explore the possibility of using PAR extract as an anticariogenic agent. Methods: Mixed extracts were prepared at 0, 1.25, 2.5, and 5 mg/mL concentrations, and an S. mutans-containing solution of 100 μL was inoculated into the medium. The survival rate of human keratinocyte (HaCaT) cells was assessed to confirm stability. One-way ANOVA was performed to evaluate the antibacterial activity against S. mutans and the proliferation of HaCaT cells. Results: Higher concentrations of the PAR extract showed more growth inhibition of S. mutans over time, with the complete inactivation of S. mutans at 5 mg/mL. HaCaT cell density was reduced at a PAR extract concentration of 1.25 mg/mL, but IC50 was not observed, confirming that the concentration used did not affect the cytotoxicity and proliferation. Conclusions: Results showed that the PAR extract was excellent as a natural substance with anticariogenic effects that inhibited the growth of S. mutans and did not affect the cell viability, thus indicating the potential for clinical application.

[Health Risk Assessment of Heavy Metals in Soils of a City in Guangdong Province Based on Source Oriented and Monte Carlo Models].

Taking a city in Guangdong Province as the research area, the concentration and spatial distribution characteristics of heavy metals in the surface soil were studied to clarify the situation of soil heavy metal pollution and priority control factors, providing basic data for the prevention and control of soil heavy metal pollution in the city. The content characteristics of heavy metals in 221 soil samples in the city were analyzed, and the potential health risk assessment and source analysis were carried out through the Monte Carlo model, the potential health risk assessment (HRA) model, and the PMF receptor model. It was found that heavy metals ω(As), ω(Hg), ω(Cd), ω(Pb), ω(Cr), ω(Cu), ω(Ni), and ω(Zn) in the soil of the city were 18.16, 0.43, 1.46, 68.57, 98.34, 64.19, 26.53, and 257.32 mg·kg-1, respectively, with a moderate to high degree of variation. Except for Ni concentration, the soil concentrations of other heavy metal elements exceeded the background values of soil in Guangdong Province to a certain extent, and the concentrations of Cd and Zn exceeded the national secondary standards, resulting in severe heavy metal pollution; the main sources of heavy metals were industrial sources, and natural parent materials, lead battery manufacturing, transportation, artificial cultivation, and pesticide and fertilizer inputs also had an undeniable impact on the accumulation of heavy metals in the soil. Heavy metals in the soil had a certain degree of tolerable carcinogenic health risk for both children and adults, whereas non-carcinogenic risks could be ignored. The potential health risk of children was greater than that of adults, and the main exposure route was through oral intake. The input sources of pesticides and fertilizers and As should be the main controlling factors for the health risks of heavy metals in the city's soil, followed by mixed sources and Cr. There were differences in the spatial distribution characteristics and relative pollution levels of heavy metals, and it is necessary to deepen zoning monitoring and control, strengthen soil pollution prevention and control, and reduce human input of heavy metals in soil.

Agricultural performance of biomaterials mulching based on nitrosamine-free natural rubber latex

Natural rubber mulching material is generally more environmentally friendly than a conventional mulching. Artificial straw and mulch derived from natural rubber latex (NRL) with no presence of nitrosamines were used as sustainable alternatives to substitute for conventional materials like rice straw and polyethylene plastic. A real-time recorded field study employed Internet of Things (IoTs) with tracking devices and sensors to monitor the growth and quality of cucumber plants (Cucumis sativus L.) over a 50-day period. Results of the study highlight the superior efficiency of artificial straw, showcasing enhanced growth and quality. NRL mulching from natural rubber latex contained nanocellulose (CNC) filler and was vulcanized at room temperature. The addition of 3 parts per hundred rubber (phr) of CNC significantly enhanced the mechanical properties of the NRL formulation, particularly in tensile (22.13±2.26 MPa) and tear strength (39.13±4.58 N/mm). The NRL mulching was demonstrated to promote plant growth and increase yield. It has been developed to ensure the safety of agricultural products and to support environmental conservation.

Molecular‐Engineered Wool for Sustainable All‐Weather Radiative Cooling Textiles

AbstractPersonal thermal regulation through passive radiative cooling is an effective strategy to achieve sustainable development. Although recent advances have introduced various cooling textile designs, the extensive use of materials unsuitable for common textiles, alongside coating or compositing technologies, not only compromises the wearability and safety of these textiles but also impacts green sustainability. Herein, it is shown that wool is a promising natural material for transferring mid‐infrared human body radiation, but the high absorption in the solar spectrum prohibits wool from achieving satisfactory daytime radiative cooling. Thus the natural wool impregnates zinc ions into the protein chains to form a zinc‐ion woolen (wool‐Zn) fabric. The wool‐Zn fabric can provide humans with a cooling sensation both indoors and daytime outdoors, showing a temperature reduction of 2 °C on human skin indoors and a reduction of 7 °C on artificial skin under direct sunlight, respectively, when covered by wool‐Zn fabrics compared to when covered with cotton. Moreover, the wool‐Zn fabric shows desirable antibacterial properties and durability against washing and abrasion, while maintaining desirable wearability. As a result, the wool‐Zn fabric shows great potential for commercial application in personal thermoregulation and provides an effective avenue toward sustainable energy and environment.

Diatomite-incorporated hierarchical scaffolds for osteochondral regeneration

Osteochondral regeneration involves the highly challenging and complex reconstruction of cartilage and subchondral bone. Silicon (Si) ions play a crucial role in bone development. Current research on Si ions mainly focuses on bone repair, by using silicate bioceramics with complex ion compositions. However, it is unclear whether the Si ions have important effect on cartilage regeneration. Developing a scaffold that solely releases Si ions to simultaneously promote subchondral bone repair and stimulate cartilage regeneration is critically important. Diatomite (DE) is a natural diatomaceous sediment that can stably release Si ions, known for its abundant availability, low cost, and environmental friendliness. Herein, a hierarchical osteochondral repair scaffold is uniquely designed by incorporating gradient DE into GelMA hydrogel. The adding DE microparticles provides a specific Si source for controlled Si ions release, which not only promotes osteogenic differentiation of rBMSCs (rabbit bone marrow mesenchymal stem cells) but also enhances proliferation and maturation of chondrocytes. Moreover, DE-incorporated hierarchical scaffolds significantly promoted the regeneration of cartilage and subchondral bone. The study suggests the significant role of Si ions in promoting cartilage regeneration and solidifies their foundational role in enhancing bone repair. Furthermore, it offers an economic and eco-friendly strategy for developing high value-added osteochondral regenerative bioscaffolds from low-value ocean natural materials.

Determination Of Drag And Inertia Coefficients By An Analytical Model

Hard structures like dykes or groins have been recognized for their negative environmental impact and limited durability in the face of climate change (Sutton-Grier et al., 2015). The concept of Shore Soft Engineering (SSE) has allowed ecological considerations to be embedded in the design of coastal protection (Hartig et al., 2011). Among emerging defense structures, nature-based solutions are built with natural materials and rely on physical properties and mechanisms observed in nature. They aim to protect, manage and restore ecosystems while providing some benefit to the human-being and biodiversity (Cohen-Shacham et al., 2016); they offer an interesting alternative to hard structures. However, implementing these solutions in urbanized coastal areas where ecosystems are vulnerable can be challenging. Another alternative approach is using biomimetic solutions, which can provide the functions of natural systems like seagrass, dunes, or coral through robust human-made constructions. Natural habitats exist in a variety of more or less complex forms, ranging from rigid (mangroves, coral) to flexible (seagrass) (Mullarney and Henderson, 2018); and they drive changes in the current profile, in wave dissipation or in sediment motion. Understanding how to mimic these systems, in particular their internal geometry and hydrodynamic effects, is challenging. This complexity makes the development of biomimetic solutions difficult (Perricone et al., 2023). In this context, this study strictly focuses on wave dissipation by flexible systems. Wave dissipation by natural habitats has been extensively studied through laboratory experiments (Houser et al., 2015) and in-situ measurements (Bradley and Houser, 2009). The pioneer analytical model (Dalrymple et al., 1984) depicted aquatic vegetation as rigid cylinders; however, the rigidity assumption fails to capture the inherent flexibility of plants. Alternative strategies emerged to account for this flexibility, such as using an empirical drag coefficient (Mendez and Losada, 2004) or introducing an effective length, representing the length that a rigid cylinder would have to dissipate the same wave height as flexible cylinders (Luhar and Nepf, 2016). However, to define this effective length or an empirical drag coefficient, it is necessary to carry out in-situ measurements. Numerous analytical models based on force balance (Luhar and Nepf, 2016; Leclercq and de Langre, 2018) have been developed to represent the movement of flexible vegetation like seagrass. These models depict the flexible vegetation as a series of segmented rigid stems attached to each other and subjected to oscillating flows. Some models attempt to link stem motion with wave dissipation to integrate this coupling into numerical models (Yin et al., 2022). However, these models still require unknown quantities such as drag and inertial coefficients. The present study aims to develop an analytical model for determining drag and inertial coefficients based solely on the geometry, the structure flexibility and wave forcing. At last, the method could help better represent the dissipation into numerical simulations without the need for prior parametrization.

Composite Materials Based on Waste Chicken Feather Fibers for Oil-Spill Management

ABSTRACT Oil spills remain one of the greatest man-made ecological threats, despite numerous advanced cleanup approaches. They still pose a major challenge in the search for materials and technologies that work as efficiently and sustainably as possible. Promising natural materials include poultry feathers, which are produced in large quantities every day as a byproduct of the meat industry. In this study, the influence of different forms of absorbents (loose feathers, pillows, and sheets) based on chicken feathers and the addition of an inorganic absorbent, sepiolite, on their absorption capacity was investigated. The chemical and physical surface properties, like morphology, chemical composition, zeta potential, surface free energies and oil absorption capacities were analyzed. The Gibbs free energy of immersion wetting with oil and the work of adhesion of the adsorbents, calculated based on contact angle measurements, were confirmed by the tests of adsorption capacities according to the ASTM 726–12 standard. The results showed that pure loose feathers have the highest oil adsorption capacity, while feather pillows have only half, and composite sheets have only a quarter of this capacity. The addition of inorganic adsorbent sepiolite did not increase the absorption capacity of the composites.

Lignin-Derived Lightweight Carbon Aerogels for Tunable Epsilon-Negative Response.

Electromagnetic (EM) metamaterials have garnered considerable attention due to their capacity to achieve negative parameters, significantly influencing the integration of natural materials with artificially structural media. The emergence of carbon aerogels (CAs) offers an opportunity to create lightweight EM metamaterials, notable for their promising EM shielding or absorption effects. This paper introduces an efficient, low-cost method for fabricating CAs without requiring stringent drying conditions. By finely tuning the ZnCl2/lignin ratio, the porosity is controlled in CAs. This control leads to an epsilon-negative response in the radio-frequency region, driven by the intrinsic plasmonic state of the 3D carbon network, as opposed to traditional periodic building blocks. This approach yields a tunable and weakly epsilon-negative response, reaching an order of magnitude of -103 under MHz frequencies. Equivalent circuit analysis highlights the inductive characteristics of CAs, correlating their significant dielectric loss at low frequencies. Additionally, EM simulations are performed to evaluate the distribution of the electric field vector in epsilon-negative CAs, showcasing their potential for effective EM shielding. The lignin-derived, lightweight CAs with their tunable epsilon-negative response hold promise for pioneering new directions in EM metamaterials and broadening their application in diverse extreme conditions.

Ecofriendly and high-performance flexible pressure sensor derived from natural plant materials for intelligent audible and silent speech recognition

Flexible pressure sensors (FPSs) are widely used in human–computer interaction (HCI) and medical diagnoses, but their further development faces several challenges. Integrating artificial intelligence (AI) with FPSs is indispensable for advancing the cognitive capabilities of HCI systems, but the FPS must also be ecofriendly, cost-effective, and high-performance to meet the demands of environmental protection and sustainable development. Here, a biodegradable capacitive FPS is presented that is fabricated from natural plant materials (i.e., cornstarch and lignocellulose) while exhibiting remarkable attributes such as high sensitivity (2.427 kPa−1 at 0–2 kPa), rapid response/recovery time (20/24 ms), extremely low detection limit (∼10 Pa), outstanding stability (> 6000 fatigue tests), excellent biocompatibility (survival rate exceeding 99 % in cell viability assays), and prominent biodegradability (complete degradation within 24 h). Prepared sensors were integrated with optimized AI algorithms, embedded systems, and wireless transmission technologies to develop a dual-functional (i.e., audible and silent) speech recognition system that achieved recognition rates exceeding 95 %. The developed sensor is expected to play a crucial role in future HCI and medical assistance applications.

Enamel remineralisation prospect of Moringa Oleifera hydrogel, eggshell hydrogel versus sodium fluoride varnish on artificially demineralised primary teeth: in vitro study.

The purpose of the present in vitro study is to investigate and compare the remineralising potential of Moringa Oleifera extract, eggshell, and sodium fluoride varnish on microhardness of artificially demineralised enamel of primary teeth with biomimetic minimally invasive approach following the world paradigm shift towards natural products in paediatric dentistry. Sample size included 44 primary molars. The mineral content and surface microhardness of all specimens were initially assessed using energy dispersive x-ray examination (EDX) and Vickers microhardness. The specimens were artificially demineralised for 96 h at a temperature of 37°C and then reassessed directly after demineralisation. The demineralised enamel specimens were randomly divided into four groups according to the remineralisation regimen utilised. Group 1: Artificial saliva (control); Group 2: Sodium fluoride varnish; Group 3: Eggshell hydrogel; and Group 4: Moringa Oleifera hydrogel. The specimens were stored for 8 days and then subsequently evaluated using EDX and microhardness assessment by Vickers microhardness test and scanning electron microscope (SEM). Results: Regarding the microhardness test, there was a significant difference between the Moringa Oleifera group and Eggshell group compared to fluoride varnish (p < 0.05). Regarding EDX analysis, there was a statistically significant difference (p < 0.05) between Moringa Oleifera group and Eggshell group compared to fluoride varnish as the highest values were for Moringa Oleifera and Eggshell. On the other hand, there was no statistically significant difference (p > 0.05) between Moringa Oleifera and Eggshell in both the measurements. Moringa Oleifera and Eggshell might be considered as a biomimetic natural material capable of guiding enamel tissue remineralisation in early carious lesion of primary teeth. This research demonstrated the capability for early enamel caries to be remineralised using novel materials with a naturally counterpart implicated in biomineralisation as proved to be more effective than traditionally used fluoride varnish in primary teeth.

Effects of soil conditioners on vineyard saline soil physicochemical properties and bacterial community in arid areas

AbstractSoil salinization adversely affects soil quality and ecosystem. Many researches have tried to ameliorate saline soils by soil conditioners. However, little is known about the differences in the responses of soil bacterial communities to natural and artificial conditioners applied to saline soils. Therefore, in this study, the effects of natural humic acid (IK), synthetic polymer (IP), and composite material (IF) (mixture of IK and IP (1:1)) on bacterial community structure and functional genes in saline soil were evaluated to clarify their differences. The results showed that the application of the three soil conditioners significantly reduced soil pH and Na+ content but increased soil alkaline phosphatase, urease, invertase and catalase activities, bacterial diversity, and nutrients, compared to the control (no conditioner). IK application increased bacterial relative abundance (e.g., Subgroup_6, RB41, MND1, and KD4‐96) and metabolic functions (e.g., Two‐component system and Biosynthesis of amino acids) by increasing soil nitrogen and maintaining K+ and Na+ balance. IP application increased soil alkaline phosphatase and urease activities as well as bacterial relative abundance (e.g., Subgroup_6, RB41, MND1, Gemmatimonadaceae, and KD4‐96) and metabolic functions (e.g., Quorum sensing and carbon metabolism) by increasing soil organic carbon/nitrogen content. IF application increased the bacterial relative abundance of Subgroup_6, RB41, and MND1 by increasing soil available nitrogen and regulated their metabolic pathways (e.g., ABC transporters and microbial metabolism). On the whole, IK, IP, and IF could regulate the structure and function of soil bacterial community in saline soils. This study clarifies difference in the effects of different soil conditioners on the amelioration of saline soils from the perspective of soil microbiology, and provides a reference for the amelioration of saline soils in arid areas.